Last reviewed: 2026-04-18 by Jake Terry, FFL07/SOT3, competitive shooter.
The Trijicon RMR Type 2 Adjustable LED Reflex Sight represents the second-generation refinement of the Ruggedized Miniature Reflex platform — a miniature red dot optic engineered for duty pistols, defensive rifles, and competition firearms. Adopted by federal agencies and competitive shooters alike, the Type 2 addresses the electronics vulnerability of the original RMR by relocating the adjustment buttons to the side and sealing the battery compartment against ingress. You mount this optic via a milled slide or Picatinny adapter, zero the windage and elevation screws with provided tools, and dial brightness across eight LED intensity steps to match ambient light from indoor ranges to high-desert noon.
Glass & Internals
Trijicon machines the RMR Type 2 housing from forged 7075-T6 aluminum, then applies a matte black anodized finish rated to MIL-A-8625 Type III hardcoat standards. The lens is a multi-coated glass window measuring 0.9 inches wide by 0.7 inches tall, offering a parallax-free optical axis and anti-reflective coatings to suppress glare under direct sunlight. Inside, an LED emitter projects a red dot (available in 3.25 MOA or 6.5 MOA configurations depending on model variant) onto the forward lens surface. The battery — a single CR2032 lithium coin cell — powers the emitter through a regulated circuit that delivers consistent dot brightness across the cell’s discharge curve. Battery life at mid-brightness setting averages 4 years of continuous operation; at minimum brightness, runtime extends beyond 5 years. Windage and elevation adjustments are 1 MOA per click, with ±65 MOA total travel in each axis.

The Numbers
| Spec | Value |
|---|---|
| Optic type | Reflex red dot (LED) |
| Dot size | 3.25 MOA or 6.5 MOA (model-dependent) |
| Brightness settings | 8 (manual adjust) |
| Battery | CR2032 lithium (4+ years runtime at mid-setting) |
| Adjustment | 1 MOA clicks, ±65 MOA windage/elevation |
| Window dimensions | 0.9″ × 0.7″ |
| Housing material | Forged 7075-T6 aluminum |
| Finish | Matte black anodized (MIL-A-8625 Type III) |
| Weight | 1.2 oz (with battery) |
| Length × Width × Height | 1.8″ × 1.2″ × 1.0″ |
| Mounting footprint | RMR pattern (Trijicon proprietary, compatible with most aftermarket milled slides) |
| Waterproof rating | 20 meters (66 feet) |
| Operating temp | -40°F to +140°F |
| Night vision compatible | Yes (lower brightness settings) |
| Warranty | Limited lifetime (Trijicon) |
| Manufacturer | Trijicon |
The Type 2 revision repositions the brightness-adjustment buttons from the top surface to the left side of the housing, reducing the risk of accidental setting changes during holster draw or when the optic contacts magazine pouches. The battery compartment now seals via an O-ring and top-loading cap, eliminating the need to remove the optic from the firearm for battery replacement. Install this sight on factory-milled slides from Glock, Springfield Armory, SIG Sauer, or aftermarket Picatinny mounts for AR-15 flat-tops and shotgun receivers. Explore our full gun sights inventory for mounting plates, co-witness irons, and backup optic solutions.
Who It’s For
Law enforcement officers mounting reflex optics on duty pistols favor the RMR Type 2 for its proven track record in patrol and SWAT deployments — the 3.25 MOA dot balances precision for 25-yard qual strings with speed at contact distances. Competitive USPSA Carry Optics and Steel Challenge shooters select the 6.5 MOA variant for faster dot acquisition on close-range arrays and swingers. Defensive rifle builders pair the RMR Type 2 with magnified prisms or LPVOs as a backup red dot canted at 45° or piggybacked atop the primary scope, ensuring a close-range aiming solution if the magnified optic fails. Hunters mounting the RMR on scout-rifle Picatinny rails gain a lightweight, fast-acquisition sight for driven game at woodland distances under 100 yards.
Installation Notes
Verify that your pistol slide accepts the RMR footprint — most factory optics-ready pistols from Glock (MOS), Springfield (OSP), SIG (RXP/X-Series), and Smith & Wesson (CORE) include adapter plates or direct RMR mounting bosses. Aftermarket slide milling services cut the RMR pattern to the ANSI/SAAMI recommended depth and install two 6-32 mounting screws. Apply a drop of blue Loctite 243 to each screw, torque to 15 in-lbs, and allow 24 hours cure time before live fire. Zero the optic at your chosen distance (15 yards for defensive pistols, 25 yards for competition) by adjusting windage and elevation screws with a flathead screwdriver — each click shifts point of impact 1 MOA (approximately 1 inch at 100 yards, 0.25 inches at 25 yards). Confirm zero over 50 rounds, then re-check torque on mounting screws. For rifle or shotgun mounts, use a Picatinny RMR adapter plate and torque to manufacturer specification (typically 25-30 in-lbs for steel adapter rings).
Clean the exterior lens with a microfiber cloth and isopropyl alcohol; avoid ammonia-based cleaners that degrade anti-reflective coatings. Inspect the battery compartment O-ring annually for compression or cracking — Trijicon sells replacement O-ring kits. Replace the CR2032 cell every 4 years under continuous-on use, or earlier if dot intensity dims noticeably. Store the optic with brightness set to Off to maximize battery shelf life during long-term storage.
Safe Handling & Compliance
Red dot sights enhance target acquisition speed but do not replace safe muzzle discipline or trigger finger indexing. Maintain the four rules of firearms safety at all times: treat every firearm as loaded, never point the muzzle at anything you’re not willing to destroy, keep your finger off the trigger until sights are on target and you’ve made the decision to fire, and be certain of your target and what lies beyond it. Confirm that your state and local jurisdiction permit the use of electronic sighting devices on the firearm platform you intend to mount — some jurisdictions restrict optics on concealed-carry handguns or hunting rifles.
- Review the four fundamental rules of firearms safety before handling any firearm equipped with this optic.
- Verify current state and local laws regarding electronic sighting devices — some hunting regulations restrict battery-powered optics during specific seasons.
- Battery failure or electronic malfunction can render the optic non-functional — co-witness iron sights or maintain proficiency with backup aiming methods.





Reviews
There are no reviews yet.