Last reviewed: 2026-04-19 by Jake Terry, FFL07/SOT3, NRA-certified firearms instructor.
Swift High Grade Big Game Hunting 260 Remington ammo loads 140-grain A-Frame bonded round-nose projectiles into hand-inspected brass cases, delivering 2793 feet per second and 2425 foot-pounds of muzzle energy from a 24-inch test barrel. The 260 Remington cartridge — a necked-down 308 Winchester case — bridges the gap between 243 Winchester velocity and 7mm-08 Remington sectional density, offering flat trajectory and moderate recoil for medium-to-large game. You’re buying factory ammunition assembled under tighter-than-SAAMI tolerances, with each round individually chambered, sized, and sealed with HERNON water-tight sealant to guard against moisture intrusion during extended hunts.
Built for the Box
The Swift A-Frame bullet integrates a cross-member copper jacket with a bonded front core, engineered to control expansion, maintain momentum, and retain 95% of original weight at all impact velocities. The semi-spitzer lead nose protects neighboring cartridges from recoil-induced deformation in the magazine. As the bullet enters tissue, the pure copper jacket tapers around the pure lead front core, moderating expansion rate. The rear core — isolated behind the cross-member — drives penetration. The wrap-around jacket base prevents core separation and ensures the recovered bullet retains nearly all of its starting mass, critical when angling through shoulder bone or quartering shots on elk, mule deer, and comparable game.
The Numbers

| Spec | Value |
|---|---|
| Caliber | 260 Remington |
| Bullet weight | 140 grains |
| Bullet type | Swift A-Frame bonded round nose |
| Muzzle velocity | 2793 fps |
| Muzzle energy | 2425 ft-lbs |
| Test barrel length | 24 inches |
| G1 ballistic coefficient | 0.401 |
| Sectional density | 0.287 |
| Rounds per box | 20 |
| Case | Brass |
| Primer | Boxer |
| Corrosive | No |
| Reloadable | Yes |
| Lead free | No |
| Intended use | Hunting |
| Manufacturer | Swift |
Each case meets or exceeds SAAMI dimensional tolerances and undergoes individual chambering verification before leaving the Swift facility. Boxer primers enable brass reuse for handloaders seeking to tailor velocity or experiment with alternative projectile weights. The 0.401 G1 ballistic coefficient and 0.287 sectional density position this load between lighter varmint offerings and heavier magnum rounds, offering predictable drop compensation at extended ranges without punishing recoil. Swift High Grade Big Game Hunting ammunition fits bolt-action rifles chambered in 260 Remington, including Remington Model 700, Savage 110, and Tikka T3 platforms.
Safe Handling & Compliance
Federal law requires purchasers to be at least 18 years old for rifle and shotgun ammunition, and at least 21 for handgun ammunition. Ammunition cannot be shipped to certain states, counties, and cities — review our ammunition shipping restrictions before ordering. Store ammunition in a cool, dry location away from heat sources and out of reach of unauthorized users.
- Observe the four universal rules of firearm safety at all times — treat every firearm as loaded, keep your finger off the trigger until ready to fire, never point at anything you are not willing to destroy, and be certain of your target and what lies beyond it.
- Verify current state and local regulations governing ammunition possession, transport, and use in your jurisdiction before ordering — some states impose additional background-check or permit requirements.
- This ammunition contains lead components; prolonged exposure to lead dust or residue during shooting or handloading can cause reproductive harm or other health effects. Use ventilation, wash hands after handling, and consult www.P65Warnings.ca.gov for California Proposition 65 disclosures.





Reviews
There are no reviews yet.