Last reviewed: 2026-04-18 by Jake Terry, FFL07/SOT3, NRA-certified firearms instructor.
30-06 Springfield ammo designed for the M1 Garand demands engineering that accounts for the semi-automatic action’s gas system and operating rod geometry — components that can be damaged by commercial loads running excessive port pressure. Sellier & Bellot addresses this with a 150-grain full metal jacket load running 2700 fps from a 23.5-inch barrel, generating 2428 ft-lbs at the muzzle while maintaining pressures within the M1 Garand’s original design envelope. The result: a training and range round that preserves the mechanical integrity of surplus rifles without sacrificing the external ballistics shooters expect from 30-06 Springfield.
Built for the Box
Sellier & Bellot has manufactured cartridge ammunition since 1825, operating under Companhia Brasileira de Cartuchos (CBC/Magtech) ownership since 2009. The company maintains production facilities in the Czech Republic, turning out military, law enforcement, and commercial loads that hold contracts across European and North American agencies. This M1 Garand-specific offering uses the same brass cases, Boxer primers, and non-corrosive propellants found in the company’s standard rifle line, with the powder charge dialed back to keep peak chamber pressure below the threshold where M1 operating rods bend or receiver heels crack.
Specs at a Glance
| Spec | Value |
|---|---|
| Caliber | 30-06 Springfield |
| Bullet weight | 150 Grains |
| Bullet type | Full Metal Jacket |
| Muzzle velocity | 2700 Feet Per Second |
| Muzzle energy | 2428 Foot Pounds |
| Rounds/box | 400 Round (20 Boxes of 20) |
| Case | Brass |
| Primer | Boxer |
| Corrosive | No |
| Reloadable | Yes |
| Test barrel length | 23.5 Inches |
| Intended use | Range & Target |
| Manufacturer | Sellier & Bellot |
The 150-grain FMJ projectile sits in the middle of the 30-06 weight spectrum, offering a balance of retained velocity and recoil impulse suitable for extended range sessions. Supersonic across typical engagement distances, the load maintains trajectory consistency inside 300 yards while keeping felt recoil manageable for shooters working through fundamentals or high-volume drills. Brass cases accept standard large rifle primers for handloaders, and the non-corrosive propellant allows normal cleaning intervals without accelerated bore fouling. Browse our full inventory of 30-06 ammo for additional grain weights and bullet profiles.
Safe Handling & Compliance
Federal law requires purchasers to be at least 18 years old for rifle and shotgun ammunition, and at least 21 for handgun ammunition. Ammunition cannot be shipped to certain states, counties, and cities — review our ammunition shipping restrictions before ordering. Store ammunition in a cool, dry location away from heat sources and out of reach of unauthorized users.
- Treat every firearm as if it is loaded; keep muzzle pointed in a safe direction; keep finger off trigger until ready to fire; identify target and what lies beyond it.
- Verify ammunition caliber matches chamber markings before loading. Using incorrect ammunition can cause catastrophic firearm failure and severe injury.
- This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands thoroughly after handling ammunition or spent casings.
Reviews
There are no reviews yet.