Last reviewed: 2026-04-18 by Jake Terry, FFL07/SOT3, NRA-certified firearms instructor.
For deer hunters working open country where holdover eats into confidence, the Nosler Ballistic Tip 25-06 Remington load delivers the velocity and expansion profile that made this cartridge a Western standard. This 115-grain polymer-tipped projectile exits at 3000 feet per second with 2298 foot-pounds of energy at the muzzle — enough to anchor whitetails, mule deer, antelope, and hogs inside 400 yards when you do your part behind the trigger. Nosler loads this round with their own brass, Boxer primers, and visual inspection on every cartridge before it ships. The 25-06 Remington remains one of the flattest-shooting non-magnum hunting cartridges in widespread use, pairing the velocity of a .257-inch bore with moderate recoil and long barrel life. If your rifle prefers 115-grain pills over lighter or heavier alternatives, this is the engineered load to zero and trust.
Load Profile
Nosler engineers the Ballistic Tip bullet with a polycarbonate tip that resists magazine deformation and initiates expansion on impact. The heavy jacket base holds together through bone, the lead core is drawn to eliminate voids, and the mid-section keeps the bullet together until it reaches tissue. Sectional density sits at 0.249, G1 ballistic coefficient at 0.453 — enough external ballistic efficiency to retain velocity downrange without requiring match-grade BC numbers. The brass case is reloadable; primers are non-corrosive Boxer. Nosler manufactures this ammunition in the United States and inspects every round visually before packaging. This is supersonic ammunition; expect consistent ignition in temperature extremes and clean primer pockets after firing.
Specs at a Glance
| Spec | Value |
|---|---|
| Cartridge | 25-06 Remington |
| Bullet Weight | 115 Grains |
| Bullet Type | Polymer Tip (Nosler Ballistic Tip) |
| Muzzle Velocity | 3000 fps |
| Muzzle Energy | 2298 ft-lbs |
| G1 Ballistic Coefficient | 0.453 |
| Sectional Density | 0.249 |
| Case Type | Brass |
| Primer | Boxer |
| Corrosive | No |
| Reloadable | Yes |
| Lead Free | No |
| Rounds per Box | 20 |
| Intended Use | Hunting (deer, antelope, hogs) |
| Manufacturer | Nosler |
This load threads the needle between speed and bullet weight for deer-class game at typical field distances. Zeroed at 200 yards, expect minimal holdover inside 300 and predictable wind deflection when you range the animal properly. Brass holds up through multiple reloading cycles when sized correctly and annealed at reasonable intervals. For hunters running 25-06 ammo in Ruger M77s, Remington 700s, or custom builds on those actions, this Nosler factory load delivers the consistency you need without working up handloads from scratch.
Safe Handling & Compliance
Federal law requires purchasers to be at least 18 years old for rifle and shotgun ammunition, and at least 21 for handgun ammunition. Ammunition cannot be shipped to certain states, counties, and cities — review our ammunition shipping restrictions before ordering. Store ammunition in a cool, dry location away from heat sources and out of reach of unauthorized users.
- Treat every firearm as if it is loaded; keep muzzle pointed in a safe direction; finger off trigger until ready to fire; identify target and what lies beyond. Review the four rules of firearm safety before handling any ammunition or firearm.
- Verify that your rifle is chambered for 25-06 Remington before loading. Do not mix ammunition types or calibers.
- This ammunition contains lead components. Wash hands thoroughly after handling. California Proposition 65 warning applies — see www.P65Warnings.ca.gov for more information.






Reviews
There are no reviews yet.