Last reviewed: 2026-04-17 by Jake Terry, FFL07/SOT3, outdoor product specialist.
For handloaders building precision 6.5 Grendel loads, new unprimed brass in 50-piece boxes offers the starting point for controlled charge weights and consistent velocities. The 6.5 Grendel brass here ships ready for small rifle primers, with case mouths that may carry minor tumble dents or pinkish anneal stain — both cosmetic artifacts that disappear after the first firing cycle.
Performance at a Glance
Wall concentricity tolerances and pressure-calibrated expansion ensure the bullet seats square in both the case and the chamber. Before loading, run each case partway into your sizer die to straighten the mouth, then chamfer and deburr inside and out. Lubricate the case neck to prevent stretching during the expander-ball pass. Small rifle primer pockets accept standard or magnum small rifle primers, giving you control over ignition characteristics.
The Numbers
| Spec | Value |
|---|---|
| Cartridge | 6.5 Grendel |
| Finish | Brass |
| Condition | New |
| Quantity | 50 Piece |
| Configuration | Box of 50 |
| Primed | No |
| Primer Size | Small Rifle |
| Country of Origin | United States of America |
| Shipping Weight | 0.910 Pounds |
Browse the full Reloading Brass catalog for additional calibers and case counts.
Safe Handling & Compliance
Reloading components require proper storage, accurate measurement, and adherence to published load data. Always consult current reloading manuals and start at minimum charge weights. This product contains lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Store brass in a cool, dry location away from primers and powder.
- Verify state and local laws governing possession of reloading components.
- Inspect each case for cracks, splits, or excessive stretch before loading.
Reviews
There are no reviews yet.