Last reviewed: 2026-04-17 by Jake Terry, FFL07/SOT3, outdoor product specialist.
Hornady 35 Remington brass gives lever-action and pump-rifle reloaders a factory-new, unprimed case that holds up across multiple firings without the concentricity drift common in bulk brass. Each case is measured for uniform wall thickness and pressure-tested for consistent expansion — critical on a rimmed cartridge where headspace tolerances already run tight. The 35 Remington is a classic whitetail round that thrives inside 200 yards, and factory ammunition is increasingly hard to find on shelves. That makes brass quality matter more than it does for mainstream calibers — you’re reloading because you have to, not just because you want to.
Load Profile
Hornady hand-inspects every piece and manufactures to tolerances that deliver consistent charges, uniform velocity, and repeatable point of impact across lots. The 35 Remington headspaces on the rim, so case-length variance translates directly to pressure spikes or failures to extract. Hornady holds neck wall variance to within 0.001 inches and anneals the shoulder to allow controlled expansion without splitting. Box of 50, new and unprimed — not loaded ammunition.
Specs at a Glance
| Spec | Value |
|---|---|
| Cartridge | 35 Remington |
| Finish | Brass |
| Condition | New |
| Primed | No |
| Quantity | 50 pieces per box |
| Manufacturer | Hornady |
Browse more calibers in the reloading brass category.
Matching It to Your Build
This brass works in any firearm chambered for 35 Remington — Marlin 336, Remington Model 8, or custom pump builds. Reloaders working with cast bullets or reduced loads will appreciate the consistent neck tension and uniform case capacity. Full-length resize before first loading, then neck-size only for subsequent firings to extend case life and preserve concentricity.
Safe Handling & Compliance
This product is an unprimed brass case — it is not loaded ammunition. Handle with standard reloading safety practices: verify case dimensions before loading, follow published load data from a reputable reloading manual, and never exceed maximum charges.
- Review the 4 rules of firearms safety before handling any firearm or component.
- California Proposition 65: this product can expose you to lead, known to the State of California to cause cancer and reproductive harm.
- Store brass in a cool, dry location away from heat sources.
Reviews
There are no reviews yet.